Why is a break-in test required for the bearing housing of a centrifugal fan?

Why is a break-in test required for the bearing housing of a centrifugal fan?

Nov 20, 2026

The bearing housing of a centrifugal fan is a critical mechanical component that directly influences the operating condition of the bearing system. Even after all parts have been correctly assembled, the unit’s operational status must be verified prior to delivery.

At SIMO Blower, once the bearing housing has been assembled, it undergoes a performance verification process. For each specific bearing housing configuration, the company conducts a dedicated break-in test to monitor operating noise levels and bearing temperatures.

Which bearing housings require a break-in test?
SIMO conducts a break-in test lasting at least two hours for the following products:
● One-piece bearing housings (size 14 and larger)
● D-type split bearing housings
This procedure allows for the observation of the bearing housing’s operational performance under test conditions before it leaves the factory.

Two Key Inspection Aspects During Testing

1. Operating Noise

During the operation of the bearing housing, the emergence of abnormal noise is a critical issue that requires close attention.Throughout the break-in period, the bearing housing must be monitored carefully for any unusual sounds. If any such noise is detected, further inspection is mandatory; operations may only proceed once the issue has been investigated and resolved.

2. Bearing Temperature Rise

Temperature monitoring is another vital component of the testing process.Bearing temperatures must be observed continuously throughout the entire operation. The test should last for at least two hours, during which time the temperature rise must be closely tracked to ensure it stabilizes within the specified range.This procedure helps to verify the thermal operating state of the bearing assembly during the test.

From Assembly to Factory Validation

While proper assembly of a bearing housing is essential, the assembly process alone cannot reveal how the unit will perform under actual operating conditions.

For specific types of bearing housings, SIMO has introduced a specialized break-in procedure, effectively adding an "operational validation" stage to the manufacturing process.

This test focuses on two practical indicators: the absence of abnormal noise during operation and the stability of the bearing temperature.

SIMO Blower’s Approach to Centrifugal Fan Manufacturing

For industrial centrifugal fans, the reliability of the entire unit depends on the quality and operational status of its key components.

As part of its manufacturing quality control, SIMO Blower places great emphasis on the assembly of bearing housing components and the verification process prior to delivery.

Are you looking for a centrifugal fan with a rigorously verified mechanical structure?

Contact SIMO Blower to discuss your fan application requirements and technical specifications.

SIMO Supplies Five Customized Centrifugal Fans for a 120 TPH Boiler Project in Pakistan